Import model with menu option Insert -> Data from File.

Change to desired accuracy ( Set Up -> Accuracy ->.

To import a part (does not work with assemblies) in Pro/ENGINEER 2001 with an accuracy other than the default accuracy, the following procedure is recommended:.

you can add the below mentioned settings in Pro/ENGINEER 2000i2. you can add the below mentioned settings in Pro/ENGINEER 2001.

With File -> Options -> Configuration Editor you can add the below mentioned settings in Creo Elements.

you can add the below mentioned settings in Pro/ENGINEER Wildfire. Some STEP specific settings can be added to the configuration file config.pro:.Pro/ENGINEER / Creo Elements - STEP Postprocessor An adjustment of the STEP file is not necessary.Special characters in the filename of the STEP file are not allowed.Recommended is to use the default settings in menu Translation Control (Tolerant Modeling).

of 1.01*10-5 mm can cause to very large STEP files and should be reduced in such cases(recommended value: 10-3 mm). The default tolerance value in menu Advanced -> Parameters -> B-Spline Aprx.Object Types: One or more of the options Solid, Product Data, Surface, and Wireframe (depending on model).Select Data to Export and define the options:.Start the external STEP processor with File -> Export -> STEP214.Misaligned, sheet boundaries, edge smoothness Without negative influence on data exchange:.

Tiny, face smoothness, spikes/cuts, edge tolerances Select Analysis -> examine Geometry -> Set All Checks (up to NX8.5) The marked elements are likely to cause problems with data exchange, depending on the messages as explained below:ĭata structures, consistency, face-face intersections, self-intersections.Select Analysis -> Examine Geometry -> all options -> all elements (up to NX2).Note that NX uses the radius of a 'tolerance tube', other CAD Systems like CATIA V4 define 'tolerance' as the distance between two points.To transfer colors of assemblies the colors should be set and saved with the individual components, not the assembly.Delete blanked elements before preprocessing.The following settings are recommended up to NX 11 and Pro/ENGINEER Wildfire 5.0 / Creo Parametric 3.0

Nx creo